Edge banding machine is mainly used for woodworking machinery and equipment for production of panel furniture and wooden doors. The maximum thickness of edge sealing machine can be 6cm. The narrowest width of the board can be 5cm. The main functions include: pre-milling, glue coating, Qitou, etc. Rough repair, finishing, scraping, polishing, slotting, etc.; to meet the needs of different users, is the ideal demand of the door industry, but also the ideal choice for general kitchen cabinet users.
1. Pre-milling: Double-milling cutters are used to modify the ripples, burrs or non-vertical phenomenon caused by sawing and cutting saws to achieve better edge-sealing effect. Makes the sealing strip and the plate more closely together, better overall and aesthetics.
2¡¢Adhesive Edge Sealing: Through special structure, the double-sided adhesive coating on the edge-sealing board and the edge-sealing material is even and ensure the adhesion is more firm.
3, Qi head: The workpiece moves through the precise linear guide, adopts the automatic tracking of the mold and the high-speed high-speed motor to cut the structure quickly to ensure that the cut surface is smooth and smooth.
4. Rough repair/extended repair: adopting automatic tracking and high-frequency high-speed motor structure to ensure that the upper and lower parts of the trimmed plate are smooth and smooth; it is used to repair the excess edge seal material on and under the processed plate edge strip.
1) Rough repair function: The rough knife is a flat knife. In order to handle the trimming of excess parts when sealing the veneer. Because the veneer cannot be directly used when sealing veneer, the thickness of veneer is generally 0.4mm. If the veneer is used directly, it will easily cause fracture. In addition, rough repair can also be used to seal the first leveling process in PVC and acrylic.
2) Finishing function: The finishing knife is an R-shaped knife, which is mainly used for PVC furniture and acrylic edge banding strips. Edge strips with a thickness of 0.6 mm or more are preferred.
5. Scrape: It is used to eliminate the ripple marks caused by the cutting process of trimming non-linear motion, making the upper and lower parts of the plate more smooth and clean.
6. Polishing: clean the finished plate with a cotton polishing wheel, and smooth the edge of the edge face by polishing.
7. Slotting: It is used for direct slotting of the side board and bottom plate of the wardrobe. It is more convenient and quick to reduce the process of cutting the board saw. It can also be used for the slotting of the aluminum plate of the door panel.
